An unvented hot water cylinder is a pressurised system which is fed directly from the cold mains water feed and therefore can deliver hot water at mains pressure, which is great for improving the performance of your shower and bath.
An unvented cylinder doesn’t require a cold water storage tank, which is ideal if you are pushed for space as well as offering more flexibility when siting the cylinder.
The water can either be heated directly via an immersion heater or indirectly via the central heating system.
The unvented hot water cylinder will require an expansion vessel to be fitted to allow the expansion of water in the system as it heats up. The Unvented cylinder also comes with other safety mechanisms, such as pressure relief valves and twin thermostats.
To ensure safety and to comply with building regulations, it is essential that an unvented hot water cylinder is installed by a G3 qualified installer and serviced annually.
Our engineers at Safe Gas and plumbing are fully qualified to undertake these works.
If you're building a new property or looking to upgrade your old one then we can install an energy efficient unvented hot water and heating system.
Our experienced and helpful staff will be happy to assist you.
Gas Safe Register is the official gas safety organisation in Great Britain.
It replaced CORGI on 1st April 2009 and the Gas Safe Register is responsible for the registration and regulation of gas engineers. Membership is mandatory for any company or engineer working with gas appliances.
Our experienced and helpful staff will always be happy to assist you.
© Copyright 2017 | i-promote.eu | All rights reserved